Tie Trunks; Direction - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures

Tie Trunks

Console Display/Instructions
6. Select the type of channel unit.
ChannelUnit DS1 Slot xx:
Select one
Foreign Exchange
Special Access
Exit
7. Save your entry.
8. Return to the System Programming menu.
Tie Trunks
This section covers programming procedures for the following tie trunk options:

Direction

Tie Trunk Seizure Type
E&M Signal
Dial Mode
Tie Trunk Dial Tone
Tie Trunk Answer Supervision Time
Disconnect Time
Direction
Use this procedure to specify whether tie trunks operate in a one- or two-way
direction. For one-way tie trunks, you must also specify whether the direction is
out or in.
Additional Information
xx = slot number entered in Step 3
Select Foreign Exchange
Enter or Special Access.
Select Enter.
Select Exit twice.
3
3
Issue 1
April 1999
3-143
PC