Recall Timer - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
System Features
Console/Display Instructions
4. Specify the feature to which you want to assign a dial code.
Behind Switch:
Make a selection
Transfer
Conference
Drop
Exit
5. Erase the current host system dial code (xxxxxx).
Program ****:
Enter host system dial
code
xxxxxx
Backspace
Exit
6. Enter the host system dial code (up to 6 digits).
7. Save your entry.
8. Return to the System Programming menu.

Recall Timer

Use this procedure to designate the length of the timed flash that is sent when
Recall is used to disconnect a call and get a new dial tone without hanging up.
Both the interval of the timed flash and the way Recall works depend on the type
of telephone and system operating mode.
The recall timer should be reset if multiline telephone users experience either of
the following problems:
Nothing happens when the user presses the Recall button on an outside
call. This indicates that the interval is too short and should be increased to
650 milliseconds or one second.
Additional Information
Select Transfer,
Conference,
or Drop.
**** = option name selected in Step 4
Press Drop.
Enter
Dial or type [n].
Select Enter.
Select Exit twice.
3
Issue 1
April 1999
3-504
PC
+ I
Ã