Primary Cover Ring Delay - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features
Console Display/Instructions
3. Select Trunk-to-Trunk Transfer.
Extensions:
Make a selection
TrkTransfer
Cover Delay
HotLine
DisplayPref
Exit
4. Specify the extension.
Trunk to Trunk Transfer:
Enter extension
Backspace
Exit
5. Assign or remove trunk-to-trunk transfer from the extension entered in Step 4.
6. Return to the System Programming menu.

Primary Cover Ring Delay

The Primary Cover Ring Delay option replaces the Delay Ring Interval
programmed on a systemwide basis in releases prior to Release 4.1.
Use this procedure to specify the following:
The delay before a Primary Cover button, programmed for Delay Ring,
begins to ring audibly.
Additional Information
>
ServiceObs
Rotary Enable
ETR
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Delete Toggle the red LED on or
off as required. Go to Step 6.
On = trunk-to-trunk transfer is enabled
Enter
Off = trunk-to-trunk transfer is disabled
Select Enter
to allow trunk-to-trunk transfer
or Delete
to disallow trunk-to-trunk transfer.
You may continue to assign or remove
trunk-to-trunk transfer from additional
extensions by repeating Steps 4 and 5.
Select Exit twice.
3
Issue 1
April 1999
3-352
PC