N11 Special Numbers Tables - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Automatic Route Selection
Console Display/Instructions
5. Save your entry.
6. Erase the current number of other digits (n).
ARS Table xx, Route x: >
Enter other digits
n
Backspace
Exit
7. Enter up to 20 other digits (n = any combination of 0 to 9).
8. Continue to specify other digits for another route in the specified subpattern or go
to Step 9.
9. Save your entry.
10. Return to the System Programming menu.

N11 Special Numbers Tables

Use this procedure to specify Facility Restriction Level (FRL) and/or digits that
must be added when emergency numbers in the N11 Special Numbers table are
dialed (for example, 411, 811, or 911).
Subpattern B, absorb, and pool routing cannot be programmed for the N11
Special Numbers tables.
NOTE:
In Release 6.0 and later systems, when routing for ARS Special Numbers
N11 calls from a private network switch that is not connected to the public
switched network, the private trunks must be assigned to the main pool
Additional Information
Select Enter.
xx = table number entered in Step 4
x = route number entered in Step 4
Next
Enter Press Drop.
Dial or type [n].
Select Next.
Return to Step 6. The next route number
is displayed on Line 1.
Select Enter.
Select Exit twice.
3
Issue 1
April 1999
3-568
PC
+ I
Ã