Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 544

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features
NOTE:
In Release 6.0 and later systems, a user can activate Call Forwarding and
Remote Call Forwarding by entering his or her home extension
authorization code while at any telephone in the system; this is useful when
activating Call Forwarding or Remote Call Forwarding at phantom stations.
It is also useful when a single-line telephone extension needs a PAUSE
character in the Remote Call Forwarding digit string.
Use this procedure to assign or remove an authorization code to an extension.
The authorization code can range from 2 to 11 characters (0
unique for each extension. An authorization code cannot begin with an "*".
If you are assigning authorization codes for a group of sequential extensions,
begin programming the lowest extension number to take advantage of the Next
screen key (see "Standard Procedures").
Summary: Authorization Codes
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3
System Manager
All
Not required
6h, Authorization Codes
Not assigned
2–11 characters (0–9, *)
Yes
No
More
Extensions
Dial authorization code (2
Enter
0 9, *)
Enter Exit
–
Type ext. no.
Type authorization code (2
9, *) and must be
–
Dial ext. no.
Auth Code
11 digits,
–
Exit
11 digits, 0 9, *)
– –
Issue 1
April 1999
3-342