Pool Dial-Out Code - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features

Pool Dial-Out Code

Use this procedure to allow or restrict dialing pool dial-out codes and placing calls
on specific line/trunk pools. Beginning with Release 3.1, the factory settings
restrict all extensions from dialing any line/trunk pool dial-out code.
NOTE:
Prior to Release 3.1, the factory settings allow all extensions to dial any
line/trunk pool dial-out code. Entering a pool dial-out code and then deleting
that code restricts the user from using the pool associated with the entered
code.
!
SECURITY ALERT:
In Release 6.0 and later systems (Hybrid/PBX mode only), do not allow dial
access to pools of non-local tie or PRI tandem trunks. When callers in your
system need to use these pools for outside calls, use ARS to direct the calls
to these pools. Callers in your system use normal inside calling procedures
to reach extensions on private networked systems.
Summary: Pool Dial-Out Code
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
3
3
System Manager
Hybrid/PBX
Extension idle
4b, Analog Multiline Telephone
4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
4f, Tip/Ring Equipment
5a, Direct-Line Console (DLC): Analog
5b, Direct-Line Console (DLC): Digital
5c, MFM Adjunct (DLC): Digital
5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data
Workstation
Main pool: 70; All other pools: 890 to 899. All
telephones are restricted from dialing any pool dial-out
code.
Pool numbers
Yes
No
Issue 1
April 1999
3-324