Expected Digits - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
DID Trunks

Expected Digits

Use this procedure to tell the system how many digits are sent by the local
telephone company.
NOTE:
In Release 6.0 and later systems, if the dialed digits received on a DID
trunk correspond to a non-local extension number, the call is routed to that
extension.
!
SECURITY ALERT:
In Release 6.0 and later systems, do not assign a non-local remote ARS
code to the non-local dial plan. Doing so would allow DID callers to use the
private network to make outside calls. For more information, see
Dial Plan Routing'' on page
Summary: Expected Digits
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3
3-579.
3
System Manager
Hybrid/PBX
Not required
3d, Incoming Trunks: DID
3 digits
1 to 4 digits
No
No
LinesTrunks DID
block no. (1 or 2)
Enter
(1 4)
Enter Exit
–
Type trunk block no. (1 or 2)
+ I
Type no. of digits (1
''Uniform
Dial trunk
ExpectDigit
Drop Dial no. of digits
Exit
4)
–
Issue 1
April 1999
3-173