Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 623

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Group Features
Console Display/Instructions
5. Enter the extension of the calling group.
Group Calling:
Enter extension number
of group
Backspace
Exit
6. Save your entry.
7. Enter the line/trunk or pool number.
Group Calling xxxx:
Enter line/pool number
nnnn
Backspace
Exit
8. Assign or remove the line/trunk or pool from the calling group.
9. Continue to assign the line/trunk or pool to another calling group or go to Step 10.
10. Return to the System Programming menu.
Additional Information
Enter Dial or type [nnnn].
Select Enter.
xxxx = number entered in Step 5
Dial or type:
Pool number [nn]
Line/Trunk number [nnnn]
Delete
Next Slot and port number *[sspp]
Logical ID number #[nnn]
Enter
Select Enter
or Delete.
You may continue to assign or remove
lines/trunks or pools from the calling
group by repeating Steps 7 and 8.
Select Next.
Return to Step 7 to continue
programming. The next calling group is
displayed on Line 1.
Select Exit three times.
Issue 1
April 1999
3-421
PC
Ã
Ã