Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 435

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
PRI Facilities
‹
Patterns Procedure
Console Display/Instructions
1. Enter the entry number (nn = 0 to 15).
DialPlanRoutingPatterns:
Enter entry no. (0–15)
Backspace
Exit
2. Save your entry.
3. Erase the current number of digits to match entry (n).
Dial Plan Rtg Entry xx:
Enter digits to match
n
Backspace
Exit
4. Enter the new number of digits to match (n = 0 to 8; use 0 to match any number
of digits).
5. Continue to assign the digits to another routing entry or go to Step 6.
6. Save your entry.
7. Program additional options by returning to Step 4 of the main procedure or
go to Step 8.
8. Return to the System Programming menu.
Additional Information
Leave field blank to match any pattern.
Enter Dial or type [nn].
Select Enter.
xx = number entered in Step 1
Next
Enter Press Drop.
Dial or type [n].
Select Next.
Return to Step 3. The next dial plan
routing entry is displayed on Line 1.
Select Enter.
Select Exit three times.
3
Issue 1
April 1999
3-233
PC
Ã
+ I
Ã