Copy Calling Restrictions - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features
Console/Display Instructions
4. Save your entry.
5. Select the appropriate restriction.
Extension xxxx:
Select one
Unrestricted
Outward Restrict
Toll Restrict
Exit
6. Continue to assign or remove restrictions from another extension or go to Step 7.
7. Save your entry.
8. Return to the System Programming menu.

Copy Calling Restrictions

Use this procedure to copy calling restrictions, allowed lists, and disallowed lists.
Feature assignment must be completed for the "copy from" extension. These
features can then be copied to an individual extension or block of extensions with
identical calling restriction requirements.
If you are copying restrictions to a block of extensions and one of the extensions
in the block is in use, the display shows the Station Busy - Pls Wait
message. Copying for the rest of the extensions in the block is delayed until the
Additional Information
Select Enter.
If you get the Station Busy message,
wait for an idle condition or exit system
programming and try again later.
xxxx = number entered in Step 3
Unrestricted = remove all restrictions
Outward Restrict = restrict extension
from making outside calls (local and toll)
Next Toll Restrict = restrict extension from
Enter making toll calls
Press the button or function key next to
your selection.
Select Next.
Return to Step 5 to continue
programming. The next extension is
displayed on Line 1.
Select Enter.
Select Exit.
3
Issue 1
April 1999
3-329
PC