Program Extension - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
4 Centralized Telephone Programming

Program Extension

The sections that follow explain the use of menu selections for programming a
single extension (Program Extension), and for using one extension as a template
for programming several extensions of the same type (Copy Extension).
NOTE:
It is recommended that you use the programming codes for centralized
programming; however, you may also use the List Features option that is
available on the programming screen.
on page 4-11
Program Extension
Review the items below before you begin to program extensions.
Use
to program.
If you enter a feature code incorrectly or enter a feature code that is not
appropriate for the button, a beep sounds or the message Programming
Error appears and the green LED next to the button flashes. If this
happens, press the button again and repeat the procedure.
If you make a mistake and program the wrong feature on a button, follow
the steps below:
1.
2.
3.
If you press a line button that is not active, the screen shown here appears.
Press Home to return to the Home screen.
Blank
Press HOME to Exit
Sys Program
You can use the Extension Information (Ext Info) report option on the
Print menu to print all of the programmed features for a specific extension.
At the Centralized Programming menu, follow the procedure below to program
features onto a single telephone.
for details about this option.
Table 4-1 on page 4-6
Press the button.
Select Delete (press 2 on the PC).
Press the button again.
Page 1
Page 2
ListFeature
See ''Using the List Feature Menu''
4
to locate the code for the feature that you want
Issue 1
April 1999
4-4