Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 356

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Tie Trunks
Console/Display Instructions
2. Enter the number of the line/trunk.
**** Trunk dial:
Enter Trunks w/TouchTone
Backspace
Exit
3. Assign or remove touch-tone dial mode from the line/trunk.
4. Return to the System Programming menu.
u
Block Procedure
Console/Display Instructions
1. Specify the block of 20 lines associated with the 20 line buttons on the
system programming console.
2. Specify touch-tone or rotary signaling for each line/trunk.
3. Return to the System Programming menu.
Additional Information
****
Delete
Enter Dial or type [nnn].
Select Enter
or Delete.
You may continue to assign or remove
touch-tone dial mode from additional
lines/trunks by repeating Steps 2 and 3.
Select Exit three times.
Additional Information
Select Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Toggle the green LED on or off as required:
On = touch-tone
Off = rotary
Select Exit three times.
= option name selected in Step 3
3
Issue 1
April 1999
3-154
PC
Ã
PC