Delete Digits - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
DID Trunks
Console/Display Instructions
5. Save your entry.
6. Erase the current number of expected digits (n).
DID Block x:
Enter number of expected
digits (1–4)
n
Backspace
Exit
7. Enter the number of expected digits (n = 1 to 4).
8. Continue to specify expected digits for the other trunk block or go to Step 9.
9. Save your entry.
10. Return to the System Programming menu.

Delete Digits

Use this procedure to specify the number of leading digits to be deleted from the
digits sent by the local telephone company. Use this procedure when the number
of digits sent by the telephone company is greater than the number in the system
numbering plan.
Summary: Delete Digits
Programmable by
Mode
Idle Condition
Planning Form
Additional Information
Select Enter.
x = block entered in Step 4
Next
Enter Press Drop.
Dial or type [n].
Select Next.
Return to Step 6. The next block is
displayed on Line 1.
Select Enter.
Select Exit twice.
System Manager
Hybrid/PBX
Not required
3d, Incoming Trunks: DID
3
3
Issue 1
April 1999
3-175
PC
+ I
Ã