Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 532

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features
busy extension becomes idle. The number of the busy extension is not shown. If a
DSS is attached, the LED associated with the busy extension is on. If you exit
instead of waiting for the busy extension to become idle, copying for the rest of the
extensions in the block is canceled; however, the restrictions that have already
been copied are not canceled.
If you are copying restrictions to a block of extensions, they must be sequentially
numbered.
The extensions you are copying to and from can be both operator and
nonoperator positions.
NOTE:
Dial-out code restrictions are not copied.
Summary: Copy Calling Restrictions
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
3
System Manager
All
"Copy to" extension or extensions idle
4b, Analog Multiline Telephone
4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
5a, Direct-Line Console (DLC): Analog
5b, Direct-Line Console (DLC): Digital
5c, MFM Adjunct: DLC
5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data
Workstation
Not applicable
Not applicable
No
Not applicable
To copy to a single extension:
Extensions RestrctCopy
from ext. no.
Enter
Enter Exit Exit
Dial copy
Single
Dial copy to ext. no.
Exit
Issue 1
April 1999
3-330