Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 156

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
2 Programming with SPM
Using SPM
4. Specify a backup filename.
To select the default filename, use the arrow keys to highlight backup.ams
and press
To enter a different filename, use the arrow keys to select MAKE NEW FILE
and press
5. Type the new filename and press
Press ESC to Abort.
Enter filename:
(default is backup.ams)
You can specify a drive letter with the filename, but no path information.
6. Verify that the filename chosen does not already exist.
This screen appears only if the filename chosen already exists. Continue with
Step 7 if this screen does not appear
The file already exists.
If you continue, the old
version will be deleted.
Press ESC to abort.
or c to continue.
7. View the backup status screen.
Press ESC to Abort.
Est. Blocks: xxx - xxxx
filename
BACKUP IN PROGRESS
Received Block xx
SPM indicates the status of the backup by displaying the number of the last block
received (xx). Line 2 of the display screen shows the estimated number of blocks
to be sent from the control unit (xxx-xxxx). This line is blank if you are backing
up from Release 1.0.
. Go to Step 6.
. Go to Step 5.
.
If you are working from the floppy drive,
A:\ appears on the screen.
Press to abort the backup.
Go to Step 1 to create a different backup
file.
Press to continue.
C
Go to Step 7.
filename = backup filename
specified in Step 5
Issue 1
April 1999
2-30