Types Of Programming - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
1 Programming Basics
Introduction to System Programming

Types of Programming

The three types of programming available for the communications system are:
System Programming. This type of programming enables the system
manager to program features that affect all or most system users, and
requires one of the following:
Extension Programming. This type of programming enables individual
extension users and system operators (except for Queued Call Console
operators) to change their extension features to meet individual needs.
For details about extension programming, see the appropriate user and
operator guides.
Centralized Telephone Programming. This type of programming enables
the system manager to program any feature that can be programmed by
individual extension users or system operators. Some features can be
programmed only in centralized telephone programming. Centralized
telephone programming can be done on the programming console or on a
PC with the SPM software. See
Programming."
If your system has the Integrated Solution II
(IS II/III) UNIX
list of the appropriate documentation.
1 Can no longer be ordered.
— An MLX-20L telephone connected to one of the first five jacks of the
first MLX module in the control unit.
— A PC with System Programming and Maintenance (SPM) software.
SPM emulates a system programming console on your PC.
The PC should be connected to the lower port (labeled ADMIN) on
the processor module. A PC with a modem can perform system
programming remotely through the public network, or by connecting
to a tip/ring extension jack (012 (T/R), 016 (T/R), or 008 OPT
module) on the communications system. A built-in modem in the
processor allows the PC and the communications system to
communicate.
®
application, see
1
Chapter 4, ''Centralized Telephone
1
or Integrated Solution III
Chapter 2, ''Programming with
Issue 1
April 1999
1-3
1
SPM" for a