Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 257

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Lines and Trunks
l
Single-Line Procedure
Console/Display Instructions
1. Specify entry mode.
2. Enter the number of the line/trunk with touch-tone dialing.
OutTrunk Dial:
Enter Trunks w/TouchTone
Backspace
Exit
3. Assign or remove touch-tone signaling from the line/trunk.
4. Return to the System Programming menu.
u
Block Procedure
Console/Display Instructions
1. Specify the block of 20 lines associated with the 20 line buttons on the system
programming console.
Additional Information
Select Entry Mode.
Delete
Enter Dial or type [nnn].
Select Enter
or Delete.
You may continue to assign or remove
touch-tone signaling from additional
lines/trunks by repeating Steps 2 and 3.
Select Exit three times.
Additional Information
Select:
Lines 01–20
Lines 21–40
Lines 41–60
Lines 61–80
3
3
Issue 1
April 1999
3-55
PC
Ã
PC