Disconnect Time - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
DID Trunks
Console/Display Instructions
5. Save your entry.
6. Specify immediate-start or wink-start.
DID Block x:
Select type
Immed
Wink
Exit
7. Continue to specify trunk type for the other trunk block or go to Step 8.
8. Save your entry.
9. Return to the System Programming menu.

Disconnect Time

Use this procedure to specify the DID trunk disconnect time limit in milliseconds.
Summary: Disconnect Time
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Additional Information
Select Enter.
x = block number entered in Step 4
Next Select Immed
Enter or Wink.
Select Next.
Return to Step 6. The next trunk is
displayed on Line 1.
Select Enter.
Select Exit twice.
System Manager
Hybrid/PBX
Not required
3d, Incoming Trunks: DID
500 ms
10 to 2,400 ms, in increments of 10 ms
No
Yes
3
3
Issue 1
April 1999
3-170
PC