Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 749

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Automatic Route Selection
Area code tables can contain only area codes. In Release 6.0 and later systems,
these tables are often used to provide cost-efficient calling through private
network lines/trunks connected to another system. The type of table required
depends upon how users in the networked systems will employ networked lines.
When you use ARS in this way, the ARS access code is only permitted on private
trunks and is blocked from calls that arrive from the public switched network.
Exchange and 1 plus 7-digit tables can contain only exchanges.
The wildcard character (Pause) cannot be used to enter area codes or exchanges
in ARS tables.
Summary: ARS Tables
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3
System Manager
Hybrid/PBX
Not required
3f, Automatic Route Selection Tables
Not applicable
Not applicable
Yes
No
Tables ARS ARS Input
Specify table type
Enter
no. Drop
Enter
Exit Exit
Type table no.
type Type entry no.
no.
Dial table no.
Dial entry
Enter
Dial no.
Enter
Select table
+ I
Issue 1
April 1999
3-547
Type