Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 216

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Basic System Operating Conditions
Console Display/Instructions
2. Select Automatic Maintenance Busy.
System:
Make a selection
Restart
SProg Port
Mode
Board Renum
Exit
3. Enable or disable Automatic Maintenance Busy.
Auto-Maintenance Busy:
Select one
Enable
Disable
Exit
4. Save your entry.
5. Select the malfunctioning tie trunk service.
Auto Busy TIE Trunks:
Select one
Enable
Disable
Exit
6. Save your entry.
7. Return to the System Programming menu.
Additional Information
MaintenBusy
Date
Time
Back/Restore
Disable leaves malfunctioning trunks
available for outgoing calls.
Select Enable
or Disable.
Enter
Select Enter.
If you selected Enable or Disable and
your system has no tie trunks, you have
finished this procedure. Go to Step 7.
If you selected Enable and your system
has tie trunks, specify whether to take
malfunctioning tie trunks out of service
automatically or leave malfunctioning tie
trunks available for outgoing calls.
Enter Select Enable
or Disable.
Select Enter.
Select Exit.
Issue 1
April 1999
3-14
PC