Tie Trunk Answer Supervision Time - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Tie Trunks
Console Display/Instructions
2. Specify remote or local dial signaling for each block.
3. Return to the System Programming menu.

Tie Trunk Answer Supervision Time

Use this procedure to specify the tie trunk answer supervision time in
milliseconds. This is the time limit for the called system to respond.
Summary: Tie Trunk Answer Supervision Time
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
Toggle the green LED on or off as required:
On = remote dial tone
Off = local dial tone
Select Exit three times.
3
3
System Manager
All
Not required
3c, Incoming Trunks: Tie
300 ms
20 to 4,800 ms, in increments of 20 ms
No
Yes
LinesTrunks TIE Lines
trunk no.
Enter
4,800)
Enter Exit
Type trunk no.
+ I
Type no. of ms (20–4,800)
AnsSupvr
Drop Dial no. of ms (20–
Exit
Issue 1
April 1999
3-158
PC
Dial