Required Parts - Lucent Technologies PARTNER Advanced Communications System Installation Manual

Required Parts

You may have multiple system component packages;
Check your packages to be sure you have the parts shown here (if not, call for support as
instructed on the inside front cover of this guide).
PARTNER Advanced Communications System Processor Module
ACS Processor
Module
5-Slot Carrier
206 Module
PARTNER
PFT
L
I
N
E
S
206
MODULE
PFT
E
X
T
E
N
S
I
O
N
S
206
Module
Figure 1. Required Parts
*
The Backup/Restore PC Card is included with the PARTNER ACS processor module when the system is purchased in the
United States or Canada. Otherwise, it can be purchased separately.
For a 5-Slot carrier, you will need to obtain four #12 screws of the appropriate type for the
wall and weight of the control unit (a control unit with four 206 modules and a processor
module weighs approximately 31 pounds or 14 kilograms). The weight of other configurations
may vary slightly.
In addition, if you need modular telephone cords to connect the extension jacks in the control
unit to the modular connecting blocks for extensions in the equipment room, short telephone
cords or wall plates to wall mount PARTNER-model phones, or a 355A/355AF adapter and
D8W telephone cord to connect a call reporting device, order them before installation. Refer
AC Power Cord
AAA Alkaline
Batteries
Battery Door
Cover
PAR TN
ER Plu
s
Cover
5-Slot Carrier
400 Module
PARTNER
PFT
L
I
N
E
S
400
MODULE
R1.0
7-foot
Line Cords
PFT
L
I
N
E
S
400
Module
Figure 1
Backup/Restore
PC Card*
1
#8-15 x 1 / "
2
Phillips ® Sheet
Metal Screws
2-Slot Carrier
2-Slot
Carrier
308EC Module
7-foot
Line Cords
308EC
Module
shows the package contents.
7-foot
Line Cords
3
#4 x / "
4
Panhead
Sheet Metal
Screws
1
#8-15 x 3 / "
2
Phillips Panhead
Screw
7-foot
Line Cords
Required Parts
5