user password
Use the user password command to create a local user or change the password
for an existing user.
Syntax
user-id
user
password {
user-id — User ID (Range: 1–128).
•
password —User password (Range: 8–64 characters).
•
enc-password —User password in encrypted form.
•
Default Configuration
There are no users configured by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(Config-CP)#user 1 password
Enter password (8 to 64 characters): ********
Re-enter password: ********
user session-timeout
Use the user session-timeout command to set the session timeout value for a
captive portal user. Use the no form of this command to reset the session
timeout to the default.
Syntax
user-id
user
session-timeout
user-id
no user
session-timeout
user-id — User ID (Range: 1–128).
•
password
| encrypted
timeout
enc-password
}
Captive Portal Commands
1419