Figure 64: Installing The M120 Front Air Filter - Juniper M120 Hardware Manual

See Also
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
While pushing the air filter straight back into the chassis, lift the front edge of the air
3.
filter to secure it under the hooks.
Reinstall the air filter faceplate onto the chassis, and fasten the captive screws on
4.
both sides.
Lower the cable management system back into position.
5.
Rearrange the PIC cables in the cable management system. For more information
6.
about proper cable arrangement, see
page 275.

Figure 64: Installing the M120 Front Air Filter

M120 Cooling System Description on page 19
Maintaining the M120 Air Filter on page 263
Troubleshooting the M120 Cooling System on page 286
Removing the M120 Air Filter on page 187
M120 Cooling System Description on page 19
Chapter 25: Replacing Cooling System Components
"Maintaining M120 PICs and PIC Cables" on
189