Juniper JUNOS OS 10.3 - SOFTWARE Manual page 113

Table 16: Junos OS Layer 3 Protocol Statements and Features That Are Not
Supported (continued)
Feature
PIM SSM
PIM DM
PIM:
IPv6
Routing instances:
Routing instance forwarding
SAP and SDP
General routing options in the
routing-options hierarchy:
MPLS and
label-switched-paths
Traffic sampling and
fowarding in the
hierarchy
forwarding-options
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Configuration Statements Not Supported on EX Series Switches
Not supported on EX2200 switches
Not supported on EX2200 or EX4500 switches
inet6 family (EX2200 and EX4500 switches)
and subordinate statements
l2vpn
and subordinate statements
ldp
and subordinate statements
vpls
and all subordinate statements
sap
auto-export and subordinate statements
and subordinate statements
dynamic-tunnels
and subordinate statements
lsp-next-hop
and subordinate statements
multicast
and subordinate statements
p2mp-lsp-next-hop
route-distinguisher-id statement
and subordinate statements
accounting
and
family mpls family multiservice
Under monitoring group-name family inet output
cflowd statement
export-format-cflowd-version-5
flow-active-timeout statement
flow-export-destination
flow-inactive-timeout
statement
interface
statement (On EX Series switches, port mirroring is implemented using the
port-mirroring
statement.)
analyzer
and subordinate statements
sampling
Layer 3 Protocols Supported on EX Series Switches on page 14
EX Series Switch Software Features Overview on page 3
under hierarchy
hash-key
hierarchy:
statement
statement
statement
Chapter 1: Software Overview
17