Show Mvrp; Table 210: Show Mvrp Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show mvrp

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 210: show mvrp Output Fields

Field Name Field Description
Displays global MVRP information:
Global MVRP
configuration
MVRP status
MVRP dynamic vlan creation
or
MVRP Timers (ms) Displays MVRP timer information:
Interface
Join
advertisements.
Leave
remove the interface from the VLAN specified in the message.
LeaveAll
maintain current MVRP VLAN membership information in the network.
Interface based Displays interface-specific MVRP information:
configuration
Interface
Status
Registration
Dynamic VLAN Creation
Disabled
Copyright © 2010, Juniper Networks, Inc.
show mvrp
Command introduced in Junos OS Release 10.0 for EX Series switches.
Display Multiple VLAN Registration Protocol (MVRP) configuration information.
view
show mvrp statistics on page 1504
Example: Configuring Automatic VLAN Administration Using MVRP on EX Series
Switches on page 1357
Verifying That MVRP Is Working Correctly on page 1404
show mvrp on page 1502
Table 210 on page 1501 lists the output fields for the
are listed in the approximate order in which they appear.
—Displays whether MVRP is
—Displays whether global MVRP dynamic VLAN creation is
.
Disabled
—The interface on which MVRP is configured.
—The maximum number of milliseconds the interfaces must wait before sending VLAN
—The number of milliseconds an interface must wait after receiving a Leave message to
—The interval at which LeaveAll messages are sent on interfaces. LeaveAll messages
—The interface on which MVRP is configured.
—Displays whether MVRP is
—Displays whether registration for the interface is
—Displays whether interface dynamic VLAN creation is
.
Chapter 63: Operational Mode Commands for Bridging and VLANs
show mvrp
or .
Enabled Disabled
or .
Enabled Disabled
Forbidden
command. Output fields
Dnabled
or .
Normal
or
Enabled
1501