Channel Voice Message; Sequencer Section - Yamaha QY-20 Supplementary Manual

Sequencer Section

(1) TRANSMIT FLOW
NOTE ON/OFF 9nH
CONTROL CHANGE BnH
PROGRAM CHANGE CnH
PITCH BEND CHANGE EnH
TIMING CLOCK F8H
START FAH
CONTINUE FBH
STOP FCH
SONG POSITION POINTER F2H
F0H 43H 0nH 0AH 04H 0AH LM__0086QY (QYSEQ DATA)
F0H 43H 0nH 7EH 04H 32H LM__0086SQ (SONG DATA)
F0H 43H 0nH 7EH 04H 0AH LM__0086AS (ALL SONG DATA)sum F7H
F0H 43H 0nH 0AH 04H 0AH LM__0086PT (PATTERN DATA) sum F7H
F0H 43H 0nH 0AH 04H 0AH LM__0086AP (ALL PAT DATA) sum F7H
F0H 43H 0nH 7EH 04H 0AH LM__0086SS (ALL DATA)
SW1 MIDI Transmit Channel
The MIDI transmit channel is fixed for each track (1 ... 7, 10)
SW2 MIDI Control
Turns transmission on or off.
SW3 System Exclusive Message Transmit Channel
Turns system exclusive message transmission on or off, and allows device number selection.
7
SW1
MIDI OUT
>
SW2
SW3
sum F7H
sum F7H
sum F7H
(2) RECEIVE FLOW
NOTE OFF 8nH
NOTE ON/OFF 9nH
CONTROL CHANGE BnH
PROGRAM CHANGE CnH
PITCH BEND CHANGE EnH
TIMING CLOCK F8H
START FAH
CONTINUE FBH
STOP FCH
SONG POSITION POINTER F2H
F0H 43H 0nH 0AH 04H 0AH LM__0086QY (QYSEQ DATA)
F0H 43H 0nH 7EH 04H 32H LM__0086SQ (SONG DATA)
F0H 43H 0nH 7EH 04H 0AH LM__0086AS (ALL SONG DATA)sum F7H
F0H 43H 0nH 0AH 04H 0AH LM__0086PT (PATTERN DATA) sum F7H
F0H 43H 0nH 0AH 04H 0AH LM__0086AP (ALL PAT DATA) sum F7H
F0H 43H 0nH 7EH 04H 0AH LM__0086SS (ALL DATA)
F0H 43H 0nH 0AH 04H 0AH LM__0018HQ (HQSEQ DATA)
F0H 43H 0nH 7EH 02H 56H LM__0018SQ (SONG DATA)
SW1 Velocity Filter
Turns step recording and editing of velocity data on or off.
SW2 Clock Condition Set
Determines whether the internal clock or an external MIDI clock signal is used as the timing clock.
SW3 MIDI Control
Turns reception on or off.
SW4 System Exclusive Message Device Number
Turns system exclusive message reception on or off, and allows device number selection.
(3) TRANSMIT/RECEIVE DATA

(3-1) CHANNEL VOICE MESSAGE

Transmission occurs only during playback or recording. The transmit channels are fixed for
each track (1 ... 7, 10).
Reception occurs only during recording. Reception always occurs on all channels.
MIDI IN
<
SW1
SW2
SW3
SW4
sum F7H
sum F7H
sum F7H
sum F7H
sum F7H
8