Effect Data Copy - Yamaha TG500 Owner's Manual

[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-2:Effect -> [ENTER]
-> [STORE/COPY]
PERFORMANCE EDIT MODE / 3: Full Edit. 3-2: Effect

EFFECT DATA COPY

This function facilitates performance effect editing by allowing the effect
parameters from any other performance combination, voice, or multi setup to be
copied to the current performance combination. You can copy an effect setup
that is close to the type you want, then edit it to produce the required sound.
PFM EF Copy from?
M
PF ´00:CO Aster
Move the cursor to the left parameter (press the [
[-1/NO] and [+1/YES] keys to select the mode containing the desired voice and
effect data ("PFM" = PERFORMANCE, "VCE" = VOICE, and "MLT" =
MULTI). Move the cursor to the right parameter (press the [
voice or performance combination is selected as the source, use the
[MEMORY] key to select the memory area from which the source voice or
performance combination is to be selected. Use the [-1/NO] and [+1/YES] keys
to select the source voice or performance number. The [-1/NO] and [+1/YES]
keys can be used to select the source multi number (0 ... 15) when "MLT" is
selected.
Once the source performance combination, voice, or multi setup has been
selected, press the [ENTER] key. "Sure?" will appear on the display.
PFM EF Copy Sure?
PFM ´00:CO Aster
Press the [+1/YES] key to copy the effect data, or press [-1/NO] to cancel
the copy operation. Once the copy operation has finished, "Completed!" will
appear on the display briefly, then the display will return to the effect edit
mode.
,
] key) and use the
.
] key) and, if a
EFFECT DATA COPY 89