show lldp med network-policy
Displays the network policy configured on a slot or port. If no option is specified, network policies
configured on all ports of the chassis are displayed.
show lldp [slot | slot/port] med network-policy
Syntax Definitions
slot
slot/port
Defaults
By default, all ports with associated policies are displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Network policy should be configured on the system before using this command.
•
Enter a slot or slot/port number with this command to display information for a specific slot or port.
Examples
-> show lldp med network-policy
slot/port
--------------+-------------------------
1/1
1/2
.
.
.
2/1
.
.
-> show lldp 1/1 med network-policy
Legend: 0 Priority Tagged Vlan
- Untagged Vlan
Slot/
Network
Port
Policy ID
-------+-----------+----------------------+------+--------+-------
1/1
1
page 12-30
Specifies the slot number on a specific module or chassis.
Specifies the slot number for the module and physical port number on
that module (for example 3/1 specifies port 1 of slot 3).
Network Policy ID
1 3 5 7 21 23 30 31
1 2 3 4 7 8 9 10
1 3 5
Application
Type
guest-voice-signaling
Vlan
Layer2
DSCP
Id
Priority
Value
-
-
0
OmniSwitch CLI Reference Guide
802.1AB Commands
June 2012