Ip Default-Ttl - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

IP Commands

ip default-ttl

Configures the Time To Live value (TTL) for IP packets. The TTL value is the maximum number of hops
an IP packet will travel before being discarded.
ip default-ttl hops
Syntax Definitions
hops
Defaults
parameter
hops
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
This value represents the default value inserted into the TTL field of the IP header for datagrams originat-
ing from this switch whenever a TTL value is not supplied by the transport layer protocol.
Examples
-> ip default-ttl 30
Release History
Release 6.1; command was introduced.
Related Commands
show ip config
MIB Objects
IpDefaultTTL
OmniSwitch CLI Reference Guide
TTL value, in hops. Valid range is 1–255.
default
64
Displays IP configuration parameters.
June 2012 page 14-21