Lldp Tlv Dot3 Mac-Phy - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

lldp tlv dot3 mac-phy

Configures whether or not 802.3 TLVs are included in transmitted LLDPDUs.
lldp {slot/port | slot | chassis} tlv dot3 mac-phy {enable | disable}
Syntax Definitions
slot/port
slot
chassis
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
The ports specified with this command must already be configured to transmit LLDPDUs.
•
Using the slot or chassis parameter with this command overrides the existing configuration for any
individual ports on the specified slot number or for all ports on the switch.
Examples
-> lldp 2/4 tlv dot3 mac-phy enable
-> lldp 2 tlv dot3 mac-phy disable
Release History
Release 6.3.1; command introduced.
page 12-22
Slot number for the module and physical port number on that module
(for example, 3/1 specifies port 1 on slot 3).
The slot number for a specific module.
All ports on the switch.
Enables the transmission of 802.3 TLVs in LLDPDUs.
Disables the transmission of 802.3 TLVs in LLDPDUs.
default
disable
802.1AB Commands
OmniSwitch CLI Reference Guide June 2012