Show Lldp Network-Policy - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show lldp network-policy

Displays the MED Network Policy details for a given policy ID.
show lldp network-policy [policy_id]
Syntax Definitions
policy_id
Defaults
By default, all configured policies are displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Network policy should be configured on the system before using this command.
• Enter a policy ID with this command to display information for a specific policy.
Examples
-> show lldp network-policy
Legend: 0 Priority Tagged Vlan
- Untagged Vlan
Network
Policy ID
-----------+----------------------+------+--------+-------
1 voice
12 guest-voice
21 streaming-voice
31 guest-voice-signaling
-> show lldp network-policy 1
Legend: 0 Priority Tagged Vlan
- Untagged Vlan
Network
Policy ID
-----------+----------------------+------+--------+-------
1 voice
page 12-28
Policy identifier for a network policy definition. Valid range is between
0 and 31.
Application Vlan
Type Id
Application Vlan
Type Id
Layer2 DSCP
Priority Value
4000 7 33
- - 44
0 4 11
23 2 1
Layer2 DSCP
Priority Value
4000 7 33
OmniSwitch CLI Reference Guide
802.1AB Commands
June 2012