Otto Bock 8E38 8 Series Instructions For Use Manual page 36

Muscle signal via the electrode
Speed:
Proportional, 15 mm/s to 300 mm/s
Initial gripping force
10 N
Control with one electrode and one switch
Opening: Proportional via the OPEN electrode.
Closing: At maximum speed by briefly activating the switch.
Open
Muscle signal via the electrode
Speed:
Proportional, 15 mm/s to 300 mm/s
Initial gripping force
10 N
Control with one switch
This program can be used in combination with any MyoBock switch.
Opening: At maximum speed as long as the OPEN side of the switch is activated. The hand
then remains open.
Closing: At maximum speed by activating the CLOSE contact of the switch.
Open
The hand opens as long as the OPEN side of
the switch is activated
Speed:
Proportional, 15 mm/s to 300 mm/s
Initial gripping force
10 N
Connect the following cables to the 9E169 coaxial plug.
• see fig. 6 (1): battery connection cable
• see fig. 6 (2): electrode
• see fig. 6 (3): red/white cable of the 13E99 connecting cable (closing contacts)
6.3.2.3 Program 3: AutoControl
Control with: One electrode or one linear control element or one switch
The hand closes at the fastest speed and grips an object with the lowest gripping force (10 N).
When the sensors recognise that the position of the object is changing, a readjustment is auto­
matically and continuously performed up to the respective gripping force required (max. 130 N).
36
Muscle signal via the electrode
Speed:
Constant, 300 mm/s
Automatic gripping force
readjustment
Up to max. 130 N
Close
Signal via the CLOSE side of the switch
Speed:
Constant, 300 mm/s
Automatic gripping force
readjustment
Up to max. 130 N
Close
Signal via the CLOSE side of the switch
Speed:
Constant, 300 mm/s
Automatic gripping force
readjustment
Up to max. 130 N
FlexiGrip function
Takes effect starting at the
maximum gripping force
FlexiGrip function
Takes effect starting at the
maximum gripping force
FlexiGrip function
Takes effect starting at the
maximum gripping force