Otto Bock 8E38 8 Series Instructions For Use Manual page 28

Hide thumbs Also See for 8E38 8 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
Make sure to observe any operating conditions and safety instructions stipulated by the man­
ufacturer of the implant.
WARNING
Use of damaged power supply unit, adapter plug or battery charger
Risk of electric shock due to contact with exposed, live components.
Do not open the power supply unit, adapter plug or battery charger.
Do not expose the power supply unit, adapter plug or battery charger to extreme loading
conditions.
Immediately replace damaged power supply units, adapter plugs or battery chargers.
WARNING
Skin contact with leaking lubricants due to mechanical defects
Injury due to skin irritation.
Avoid contact between leaking lubricants and the mouth, nose and eyes.
The product must be inspected by an authorised Ottobock Service Center.
CAUTION
Signs of wear on the product
Injury due to faulty control or malfunction of the product
In the interest of patient safety and in order to maintain operating reliability, the terminal
device has to be inspected by an authorised Ottobock Service Centre in case of noticeable
restrictions of functionality.
Note that the functionality of the terminal device may be limited if the battery charge level
gets too low.
CAUTION
Independent manipulation of the product
Injury due to malfunction and resulting unexpected prosthesis actions.
Manipulations to the product other than the tasks described in these instructions for use are
not permitted.
The product and any damaged components may only be opened and repaired by authorised,
qualified Ottobock personnel.
CAUTION
Use of a damaged product
Injury due to loss of product functionality.
Prior to use, conduct an external visual inspection to verify that all parts of the product are
undamaged.
In case of damage, have the product repaired promptly.
CAUTION
Penetration of product with dirt and humidity
Injury due to unexpected product behaviour or malfunction.
Ensure that neither solid particles nor liquids can penetrate into the product.
28

Advertisement

Table of Contents
loading

This manual is also suitable for:

8e39 8 series8e43 8 series

Table of Contents