Table of Contents
Advertisement
Chapter 2 Command System
Remarks
This operation fails if the specified file does not exist.
Example
The following command loads the FMT file (mask1.csv) to the upper mask.
:MMEMory:LOAD:FMT upper,mask1.csv
:MMEMory:LOAD:STATe
Syntax
:MMEMory:LOAD:STATe <file_name>
Description
Loads the specified state file (.sta).
Parameter
Name
<file_name>
ASCII String
Remarks
This operation fails if the file with the specified filename does not exist.
Example
The following command loads the state file (state1.sta) to the instrument.
:MMEMory:LOAD:STATe state1.sta
:MMEMory:LOAD:TRACe:DATA
Syntax
:MMEMory:LOAD:TRACe:DATA <label>,<file_name>
Description
Loads the specified measurement data file (suffixed with .csv).
Parameter
Name
<label>
<file_name>
ASCII String
Remarks
This operation fails if the file with the specified filename does not exist.
Example
The following command loads the measurement data file (trace1.csv) to Trace1.
:MMEMory:LOAD:TRACe:DATA TRACE1,trace1.csv
VSA Programming Guide
Type
Type
Keyword
TRACE1|TRACE2|TRACE3|TRACE4
Range
--
Range
--
Default
--
Default
--
--
RIGOL
2-41
Advertisement
Table of Contents
