System:communicate:lan[:Self]:Dhcp:state; System:communicate:lan[:Self]:Ip:address - Rigol SA5000 Series Programming Manual

Chapter 2 Command System
Example
The following command enables the auto IP setting mode.
:SYSTem:COMMunicate:LAN:SELF:AUToip:STATe ON or :SYSTem:COMMunicate:LAN:SELF:AUToip:STATe 1
The following query returns 1.
:SYSTem:COMMunicate:LAN:SELF:AUToip:STATe?

:SYSTem:COMMunicate:LAN[:SELF]:DHCP:STATe

Syntax
:SYSTem:COMMunicate:LAN[:SELF]:DHCP:STATe OFF|ON|0|1
:SYSTem:COMMunicate:LAN[:SELF]:DHCP:STATe?
Description
Enables or disables the DHCP configuration mode.
Queries the status of the DHCP configuration mode.
Parameter
Name
--
Remarks
The analyzer attempts to acquire the IP address configuration according to the sequence of DHCP, Auto IP,
and Manual IP. These three modes cannot be disabled at the same time.
ON|1: enables the DHCP configuration mode.
OFF|0: disables the DHCP configuration mode and selects the auto IP mode.
Return Format
The query returns 0 or 1.
Example
The following command enables the DHCP configuration mode.
:SYSTem:COMMunicate:LAN:SELF:DHCP:STATe ON or :SYSTem:COMMunicate:LAN:SELF:DHCP:STATe 1
The following query returns 1.
:SYSTem:COMMunicate:LAN:SELF:DHCP:STATe?

:SYSTem:COMMunicate:LAN[:SELF]:IP:ADDRess

Syntax
:SYSTem:COMMunicate:LAN[:SELF]:IP:ADDRess <ip_address>
:SYSTem:COMMunicate:LAN[:SELF]:IP:ADDRess?
Description
Sets the IP address.
Queries the IP address.
Parameter
Name
<ip_address>
Remarks
The format of <ip_address> is "nnn.nnn.nnn.nnn". The range for the first segment (nnn) of the address is
from 1 to 223 (except 127); and the range for the other three segments is from 0 to 255.
VSA Programming Guide
Type
Bool
Type
ASCII String Refer to "Remarks"
Range
OFF|ON|0|1
Range
RIGOL
Default
ON|1
Default
--
2-67