[:Source[<N>]]:Frequency[:Fixed]; [:Source[<N>]]:Phase[:Adjust] - Rigol DS1000Z Series Programming Manual

RIGOL
[:SOURce[<n>]]:FREQuency[:FIXed]
Syntax
[:SOURce[<n>]]:FREQuency[:FIXed] <frequency>
[:SOURce[<n>]]:FREQuency[:FIXed]?
Description
Set or query the output frequency of the specified source channel if the modulation is not
enabled or the carrier frequency if the modulation is enabled. The default unit is Hz.
Parameter Name
[<n>]
<frequency>
Return
The query returns the frequency in scientific notation, such as 2.0000000e+05.
Format
Example :FREQuency 1000
Related [:SOURce[<n>]]:MOD[:STATe]
Commands
[:SOURce[<n>]]:MOD:TYPe
[:SOURce[<n>]]:PHASe[:ADJust]
Syntax [:SOURce[<n>]]:PHASe[:ADJust] <phase>
[:SOURce[<n>]]:PHASe[:ADJust]?
Description
Set or query the start phase of the specified source channel. The default unit is degree
(°).
Parameter
Name
[<n>]
<phase>
Return
The query returns the start phase in scientific notation, such as 0.0000000e+00.
Format
Example :PHASe 90
2-68
Type Range
Discrete {1|2}
Sine: 0.1Hz to 25MHz
Square: 0.1Hz to 15MHz
Pulse: 0.1Hz to 1MHz
Real
Ramp: 0.1Hz to 100kHz
Arbitrary waveform: 0.1Hz to
10MHz
Type Range
Discrete {1|2}
Real 0 to 360
Chapter 2 Command System
Default
If omitted, the operation is
performed on source 1 by
default
100kHz
Default
If omitted, the operation is
performed on source 1 by
default
0
DS1000Z Programming Guide