Required spare parts
Spare part
Harness TPU connection
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V400XT
Removing the HMI signal connector
Preparations
1
2
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V400XT via myABB Business Portal,
www.abb.com/myABB.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see
Electrical safety on
page
29.
Open the door.
© Copyright 2022-2023 ABB. All rights reserved.
5.3.3 Replacing the HMI signal (FlexPendant) connector
Article number
3HAC071006-001
Article number
-
-
Article number
3HAC082020-008
Note/Illustration
Opening the door on page
5 Repair
Continued
Note
Harness-TPU
Note
Content is defined in section
Standard toolkit for controller on
page
424.
Note
182.
Continues on next page
295