ABB OmniCore V400XT Product Manual page 103

The Connected Services Gateway unit has an antenna connector on the front. See
installation procedures in section
xx2300000668
Customer cable layout
The antenna should go through the cable grommet and fasten on the cabinet.
Ethernet outlet connector, MGMT (Management)
The following type of Ethernet cable is recommended for connection to the Ethernet
outlet connector (MGMT port):
Ethernet cable
Maximum length
Type of cable
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Note
The end user needs to install proper grommets according to the diameter of the
cables which need to go through the grommet.
Incorrect use of grommets will affect ingress protection, EMI/EMC and
temperature.
It is recommended to use icotek KT grommet.
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.9 Descriptions for connectors
On-site installation on page
Value
75 m
CAT5e SF/UTP
Continued
58.
Continues on next page
103