ABB OmniCore V400XT Product Manual page 128

3 Installation and commissioning
3.7.4 Installing additional drive units
Continued
Required spare parts
Spare part
Drive unit
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V400XT
Installing the additional drive unit
Preparations
1
2
Continues on next page
128
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V400XT via myABB Business Portal,
www.abb.com/myABB.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
Open the door.
© Copyright 2022-2023 ABB. All rights reserved.
Article number Note
3HAC064983-001 DSQC3065
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC082020-008
Note/Illustration
Opening the door on page
Product manual - OmniCore V400XT
424.
182.
3HAC081697-001 Revision: A