ABB OmniCore V400XT Product Manual page 139

Installing cables with the cable grommet assembly
Preparations
1
2
3
Removing the slot cover (baseline)
1
2
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Remove the attachment screws.
Take out the cover from the inside of the
controller.
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.7 Installing the cable grommet assembly
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx2300001842
Note/Illustration
xx2100001282
Continues on next page
Continued
182.
139