ABB OmniCore V400XT Product Manual page 283

2
3
4
5
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
Disconnect all connectors from the unit
to be replaced.
Remove the screw holding the break
resistor bleeder bracket.
Remove the screws holding the break
resistor bleeder.
Remove the break resistor bleeder and
pull the cables through the opening.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.18 Replacing the break resistor bleeder
Note/Illustration
xx2200001073
xx2200001074
Continues on next page
5 Repair
Continued
283