ABB OmniCore V400XT Product Manual page 214

5 Repair
5.2.4 Replacing the 3G Connected Services gateway
Continued
2
3
4
Reconnecting the antenna
1
2
Continues on next page
214
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Hook up the Connected Services gate-
way to the bracket and push carefully into
position.
Reconnect any connectors disconnected
at removal.
Action
Place the magnet part of the antenna on
the outside of the cabinet.
Follow the cable routing recorded during
the disassembly when you reconnect the
antenna cable.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
xx2300001836
Note/Illustration
Note
The operating conditions must be such that
there is a minimum separation distance of
20 cm between the dedicated antenna and
nearby persons.
Note
The Connected Services antenna is installed
by the customer, and the cable routing can
therefore differ.
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A