ABB OmniCore V400XT Product Manual page 87

Location of FlexPendant connector
The FlexPendant connector is located on the cabinet door.
xx2300001845
Detaching the FlexPendant in automatic mode
Use the following procedure to detach the FlexPendant in automatic mode:
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
1 On the status bar, tap the QuickSet button.
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.7 Detaching and attaching a FlexPendant
Continues on next page
Continued
87