ABB OmniCore V400XT Product Manual page 125

3
4
Concluding procedure
1
2
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
Hook up the Ethernet extension switch
to the bracket and then push the switch
into position.
Note
During the installation, there should be
no gap between the upper surface of the
Ethernet extension switch and the lower
surface of highest bracket on the main
computer.
xx1800000972
Reconnect any connectors disconnected
at removal.
Action
Close the door.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.3 Installing the Ethernet extension switch
Note/Illustration
xx2300001835
Note/Illustration
Closing the door on page
Continued
183.
125