ABB OmniCore V400XT Product Manual page 183

Closing the door
Closing the door
1
2
3
4
Removing the controller covers
Preparations
1
2
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
If door stop has been used during main-
tenance, place the door stop in its origin-
al position.
Push the door back.
Turn the handle clockwise and push it
back into the lock.
Turn the key back and take it out.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.1 Opening the robot controller
Info/illustration
Info/illustration
Location of wrist strap button:
xx2300001842
Continues on next page
5 Repair
Continued
183