ABB OmniCore V400XT Product Manual page 206

5 Repair
5.2.3 Replacing the Ethernet switch (DSQC1035)
Continued
3
Removing the Ethernet extension switch (option)
1
2
Continues on next page
206
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Disconnect all connectors from the unit
to be replaced.
Carefully pull the side of the Ethernet
extension switch and rotate it tightly to
take it out from the bracket.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2300001842
Note/Illustration
xx2300001835
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A