ABB OmniCore V400XT Product Manual page 256

5 Repair
5.2.12 Replacing the power supply
Continued
3
Removing the power supply
1
2
3
Continues on next page
256
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Remove the end clamp besides the
power supply with a screwdriver.
Disconnect all connectors from the unit
to be replaced.
Press the lower buckle to release and
remove the power supply.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2300001842
Note/Illustration
xx1900002443
xx1900001950
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A