ABB OmniCore V400XT Product Manual page 308

5 Repair
5.3.4 Replacing the cable grommet assembly
Continued
6
Refitting the cable grommet assembly
1
2
Continues on next page
308
Action
Refit the cable entry frame to the enclos-
ure wall and secure with the screws.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
Screws: Torx pan head screw M4x8 (4 pcs)
Tightening torque: 1.5 Nm.
xx1900002332
Note/Illustration
Location of wrist strap button:
xx2300001842
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A