ABB OmniCore V400XT Product Manual page 199

Refitting the main computer fan
1
2
3
Concluding procedure
1
2
3
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
Place the main computer fan in the
bracket and secure with the screws and
cable ties.
Reconnect any connectors disconnected
at removal.
Refit the fan bracket in the main com-
puter and secure the screws.
Action
If necessary, refit the Connected Ser-
vices gateway.
Close the door.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.2.3 Replacing the main computer fan
Note/Illustration
xx2200001090
Screws: Torx T10 (2 pcs)
Tightening torque: 0.7 Nm
xx2300001551
Screws: Torx T10 (6 pcs)
Tightening torque: 0.7 Nm
Note/Illustration
Refitting the Connected Services gateway
on page 213.
Closing the door on page
5 Repair
Continued
183.
199